D & H Construction
“We Specialize in Quality”
With over 20 years of experience, D & H Construction can serve all your building and construction needs in Ozaukee County, Waukesha County, Washington County and Milwaukee County. D & H Construction specializes in quality concrete flat work, masonry, stone, brick, block additions, garages and more. Call us today at 262-675-2500 whenever you want quality work at a reasonable price!
We provide FREE ESTIMATES!
We Work With:
- Developers
- Builders
- Architects
- Residential
- Businesses
- Municipal
- Building & Construction Services
- Concrete Flat Work
- Masonry Work
- Stone
- Brick
- Block
- Poured or Block Foundations
- Styrofoam Insulated Foundations
- Sidewalks
- Service Walks
- Basements
- Driveways
- Parking Slabs
- Porches / Patios
- Curbs & Gutters
- Garage Floors
- Steps
- Poured or Block Retaining Walls
- Brick Paving
- Excavating, Grading & Landscaping
- Erecting Garages & Pole Barns
- Versa-Lok Retaining Walls
Visit us again at: www.DandHConcreteMasonry.com
Milwaukee concrete, Cedarburg basement foundations, Grafton cement driveways
10220 Pleasant Valley Rd.
Cedarburg, WI 53012
262-675-2500
Milwaukee excavating, Milwaukee foundations, Milwaukee pole buildings, West Allis landscaping, West Allis concrete, West Allis garages, West Allis excavating, West Allis foundations, West Allis pole buildings, Sheboygan landscaping,
Milwaukee cement driveways, Cedarburg concrete, Grafton basement foundations
Mequon concrete, Brookfield basement foundations, Wauwatosa cement driveways
Mequon basement foundations, Brookfield cement driveways, Wauwatosa concrete
We Use Low Chert Concrete!
Courteous Service
Reasonable Rates
References Gladly Furnished
Fully Insured
Mequon cement driveways, Brookfield concrete, Wauwatosa basement foundations
Email us at: mike@dandhconcretemasonry.com
D & H Construction
For the best in masonry repairs, roofing, painting and Interior/Exterior Remodeling and Carpentry, visit www.masonryrestoration.info.
Visit www.dandsroofingsiding.com for all of your roofing, siding and gutter needs throughout Ozaukee, Washington, Milwaukee and Waukesha Counties.
Communities close to our location: Abbotsford, Alma Center, Arpin, Athens, Auburndale, Augusta, Black River Falls, Boyd, Cadott, Chili, Colby, Curtiss, Dorchester, Edgar, Fairchild, Fall Creek, Fenwood, Gilman, Granton, Greenwood, Hannibal, Hewitt, Hixton, Humbird, Loyal, Lublin, Marshfield, Medford, Merrillan, Milan, Neillsville, Northfield, Osseo, Owen, Pittsville, Spencer, Stanley, Stetsonville, Stratford, Thorp, Unity, Willard, Withee.
PRIVACY STATEMENT
D & H Construction does not collect any personal data on persons visiting this website. If you choose to contact us through e-mail or by submitting forms through US Mail, the information you provide will only be used by D & H Construction for contacting you and providing one or more of the products/services outlined above, and will not be given or sold to any other companies or individuals.
Concrete Masonry – Modern And Economical
Masonry as history knows it, makes use of blocks of cut stones such as granite, marble and travertine. Also in use centuries ago are man-made blocks made of clay. While these are ideal in most applications, they are not the most economical or the easiest to work with. In fact, these blocks can be pretty expensive.
As an economical alternative, a cast concrete also known by other names such as concrete blocks, foundation blocks, and cement blocks can be acquired at a much lower price. It is now the standard material used in a wide variety of masonry applications. As such, concrete masonry can be simply described as masonry work that makes use of cast concrete blocks instead of the traditional cut stone blocks.
Different Types Concrete Blocks
To meet the demands of different industrial applications, the regular concrete block comes in many different sizes. In the United States, perhaps the most commonly used is the one that measures 16×8×8 inches. But this is only the advertised measurement. It is in fact smaller by 3/8 inches. This is an allowance to allow mortar joints.
Also, concrete blocks can be made of different components. Each one also possesses a different level of strength and durability. For example, high density blocks are made from a mixture of crushed gravel and sand. As for the low density variants, these are typically made of industrial wastes. One example is the cinder block made of ashes.
Different Applications
Concrete masonry has a wide range of industrial applications. For tall buildings, walls made of concrete blocks are preferred because these can possess considerable strength of structure without being too thick. The concrete block is advantageous in this aspect when compared traditional masonry which uses blocks of stones or bricks.
Also, concrete blocks are ideal for use on top floors. In which case, lightweight concrete blocks may be used. This is advantageous because traditional blocks made of cut stones can be pretty heavy. If these are used, they can strain the lower floor levels with too much mass. The structure will be unstable and potentially dangerous.
Concrete masonry is also ideal for regular residential homes. It provides an economical solution that is not as expensive as traditional masonry. Moreover, the hollow structure of a concrete block is ideal for structures inhabited by people. This is because a hollow block possesses good insulation properties.
Strength Of Structure
Alright, so it is the more economical choice in masonry right? But how about the strength, is it still up to the task? As you know, it is quite common that cheaper alternatives are also less durable and less durable. Is this also true for concrete masonry?
Well, it is not necessarily the case. Concrete masonry is widely used worldwide and the strength it provides on structures is commendable. In fact, depending on the type of concrete block used, a wall or floor made with concrete blocks can withstand 1,000 up to 5,000 psi.
Therefore, concrete masonry can safely be called the modern version of the traditional one. It is still up to the task when it comes to strength and it is economical as well.
Different Kinds Of Masonry: Differences And Their Applications
Masonry is an ancient art of structure-making that makes use of stone blocks or blocks of bricks and binds them together with a strong glue to form a wall, flooring, or any other architectural structure. But there are many branches of masonry that exists. Here are some the most common ones:
Stone Masonry
This is one of the oldest forms of masonry along with brick masonry. As its name implies, this method makes use of real and naturally existing stones. These stone are extracted from their natural source and are cut to meet measurement requirements. In ancient times, buildings and wall structures can be made of cut limestone such as those found in The Great Pyramids of Giza. For interiors, decorative stones such as granite, travertine, and marble are often used.
To bind these blocks of solid stones together, a workable paste material called mortar is used. Upon mixing, the mortar is workable and can be applied over stone blocks. Once it dries, it becomes almost rock hard and is durable enough to hold the stones and support a structure.
Brick Masonry
Brick masonry, as already mentioned, is also pretty old. First signs of its application were discovered in the ancient city of Ur. Just like stone masonry, it also uses a workable paste material to bind the blocks together.
Instead of using naturally existing stones however, brick masonry makes use of man-made blocks. These are usually made of clay. These blocks are hardened by baking them in a large clay oven or by letting them dry under the sunlight.
Concrete Masonry
This is a modern day masonry which also makes use of a modern material. Instead of the traditional clay brick and blocks of stones, concrete masonry uses a hallow block made from a mixture of cement, crushed gravel, and sand. A low density and economical version which is made of industrial waste also exists.
The advantage of concrete masonry is that it is more cost-effective. And because it is hallow, it also provides good insulation. It also finds use in many applications. It is used for homes, buildings, and outdoor structures.
Veneer Masonry
Traditional masonry including stone, brick, and concrete masonry finds application in building structures that possesses structural strength. What these methods produce are the walls themselves. In veneer masonry however, the work is simply for the sake of aesthetics.
In veneer masonry, there is an already existing wall. Using this wall as the base, new blocks are put into place and thus covering up the original wall. This is done simply to make the wall more beautiful. It is highly decorative in nature.
Dry Set Masonry
In all types of masonry, a sealing or a bonding agent is used in order to hold the block pieces together. In dry set masonry, there is no mortar used. The wall or structure is made simply of blocks of stones.
This technique takes advantage of the natural shape and surface structure of the stones used. In this type of masonry, the friction between the stones is the one that provides a strong grip that holds the stones together. Sometimes, grooves are carved on the stones to increase the friction.